基于似然比检验的橡胶密封件加速试验机理一致性判别方法

加速退化试验广泛应用于橡胶密封件等长寿命产品的可靠性评估，试验过程中需要将高应力水平下的试验结果外推到正常应力水平。要获得准确的产品可靠性评估结果，需要保证加速应力下的退化失效机理与正常应力下的退化失效机理一致。基于似然比检验原理，提出加速退化试验机理一致性判别方法及流程。针对失效机理一致与失效机理变化两种场合，提出对数线性及非对数线性两类加速模型，并结合混合效应模型描述产品退化过程。利用似然比检验判断加速模型参数是否变化，完成失效机理一致性判别。仿真算例和应用实例表明，该方法能够有效判别橡胶密封件失效机理是否变化，并找到失效机理不变的应力水平边界。     

Dynamic signatures and their use in comparing the reliability of new and used systems

The signature of a system with independent and identically distributed (i.i.d.) component lifetimes is a vector whose ith element is the probability that the ith component failure is fatal to the system. System signatures have been found to be quite useful tools in the study and comparison of engineered systems. In this article, the theory of system signatures is extended to versions of signatures applicable in dynamic reliability settings. It is shown that, when a working used system is inspected at time t and it is noted that precisely k failures have occurred, the vector s [0,1]^n‐k whose jth element is the probability that the (k + j)th component failure is fatal to the system, for j = 1,2,2026;,n ‐ k, is a distribution‐free measure of the design of the residual system. Next, known representation and preservation theorems for system signatures are generalized to dynamic versions. Two additional applications of dynamic signatures are studied in detail. The well‐known “new better than used” (NBU) property of aging systems is extended to a uniform (UNBU) version, which compares systems when new and when used, conditional on the known number of failures. Sufficient conditions are given for a system to have the UNBU property. The application of dynamic signatures to the engineering practice of “burn‐in” is also treated. Specifically, we consider the comparison of new systems with working used systems burned‐in to a given ordered component failure time. In a reliability economics framework, we illustrate how one might compare a new system to one successfully burned‐in to the kth component failure, and we identify circumstances in which burn‐in is inferior (or is superior) to the fielding of a new system. © 2009 Wiley Periodicals, Inc. Naval Research Logistics, 2009     

离子束加工误差对散射损失的影响研究

离子束加工(Ion Beam Figuring,IBF)去除函数对加工残差具有重要的影响,而加工残差引起的表面散射则导致光学性能发生变化.为了减小加工残差对光学性能的影响,利用基于CCOS成形原理的离子束加工仿真程序对光学镜面进行修形,分析不同去除函数宽度对散射损失(Ratio of Scattering Loss,RSL)指标的影响.通过研究可知,随着去除函数宽度的减小,加工残差对散射损失的影响越来越小.因此,根据加工残差对RSL指标的影响程度以及RSL指标要求,可以合理选择去除函数宽度,从而在满足面形精度的同时,优化加工工艺.     

尾空泡对水下航行体流体阻尼力影响数值计算分析

针对航行体尾空泡对流体阻尼力影响的问题,结合动坐标系技术和空泡多相流数值模拟方法,通过求解雷诺平均的纳维-斯托克斯方程组,进行阻尼力计算研究。试验数据对比结果表明,该方法具有较好的精度。数值计算研究表明,尾空泡会削弱航行体尾部压力的不对称性,使航行体尾部流体阻尼力减小。当尾空泡增加到一定尺寸时,流体阻尼力减小的幅度逐渐趋缓,同时尾空泡也改变了流体阻尼力随攻角的变化趋势。研究充分表明了航行体流体力设计中考虑尾空泡影响的必要性。     

基于表层及芯材阻尼特性的夹层结构导纳分析

针对复合材料夹层板结构,综合开展芯材材料阻尼特性动力学热分析(DMTA)试验、表层玻璃钢和芯材试件阻尼衰减特性研究,通过夹层板结构的模态激振试验得到结构的模态阻尼比。从结构动力学方程出发探讨了影响多自由度系统结构传递导纳的相关参量,试验对比分析了钢质板和复合材料夹层板两型结构的传递导纳特性,并研究了激振点与响应点间距对复合材料夹层结构传递导纳的影响。研究表明:当尺寸和边界条件相同时,影响结构传递导纳的主要因素是结构的固有频率和模态阻尼。试验还得到了复合材料夹层板较钢质板的基频提高值和传递导纳降低均值,该试验结果可为工程设计提供参考。     

电子干扰对防空兵群射击指挥效率的影响评估

针对防空作战中电子对抗异常激烈的现实,利用概率论和作战运筹方法,描述了电子干扰对防空兵群射击指挥效率影响的主要特点和评估指标,分析了射击指挥方式与群抗击效率之间的数学关系,建立了搜索雷达、通信系统和火控雷达受到电子干扰时群射击指挥效率的评估模型.结合实例计算,得到了电子干扰对群射击指挥效率影响的基本规律,提出了电子干扰时选择射击指挥方式的原则与方法.